Home Forums Rides CX Gravel Grinder for Monday, 14 Aug 2017

Tagged: ,

This topic contains 6 replies, has 4 voices, and was last updated by  dawn2012 1 month, 1 week ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #39926

    bill2012
    Participant

    Proposed route,

    https://www.strava.com/routes/10133151

    For all those training for CX season, continuing up Halm to Maryhill, and back down Cox Creek to Lundy would be a nice addition to bring it up to ~47 km

    This is an official Waterloo Cycling Club ride,

    http://waterloocyclingclub.ca/cx/rides/monday-cx

    You must be a 2017 member of Waterloo Cycling Club to participate. Register here:

    http://waterloocyclingclub.ca/membership

    #39932

    Mathew Gallagher
    Participant

    see ya’ll tonight

    #39935

    francqlife
    Moderator

    With lights on for the longer route.

    #39936

    Mathew Gallagher
    Participant

    Do you have your single speed skipping issue resolved? Lights are being charged as I type

    #39937

    francqlife
    Moderator

    We’ll find out !!!

    Since my last ride…

    1) I moved the front ring (46t) from the inner position to the outer position of the cranks and added a few spacers in the hope that solves my skipping problem.

    2) I put on a SRAM PC-1 chain which is about as heavy and wide as a motorcycle chain. Geez!

    3) I put on a 16t on the back (replacing the 18t) because I was spinning out with you and Andrew shredding the pack at the front.

    So…46×16 if I go SSCX tonight.

    #39939

    francqlife
    Moderator

    Wait…whoa!

    I just looked at Bill’s route. He’s taking us through the Grand River Trail. Last time I “rode that” on SSCX…I had to “run” half of it.

    Perhaps tonight, might be a time to test the KindHuman CX Race Rig.

    #39940

    dawn2012
    Participant

    Isn’t that what you do in CX? Run half of it?
    😉

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.